Epson EMP-732

Epson EMP-732

Corporate Portable Multimedia Projectors

Ultra portable Projector for powerful presentations on the move


Overview Specs Consumables Downloads

PRODUCT TYPE Corporate Portable Multimedia Projectors
PRODUCT NAME Epson EMP-732
PRODUCT CODE V11H187053
PROJECTION SYSTEM RGB Liquid Crystal Shutter Projection System
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 0.7 inches with MLA
  Driving method Poly-Silicon TFT Active Matrix
  Pixel number 786,432 dots
(1024 x 768) x 3
  Native resolution XGA
  Aspect ratio 4:3
  Pixel arrangement Stripe
  Refresh Rate 72Hz
PROJECTION LENS Type Manual: zoom / focus
  F-number 1.58 to 1.76
  Focus length 23.7 - 28.5mm
  Zoom ratio 1:1.2
  Offset 6:1
LAMP Type 170 W UHE
OPTICAL SYSTEM Dichroic Mirror Separation & Prism combine Method
SCREEN SIZE
(PROJECTED DISTANCE)		 30 to 300 inch [1.2 to 12.1m] (Zoom: Tele),
30 to 300 inch [1.0 to 10.1m] (Zoom: Wide)
BRIGHTNESS
  High Brightness Mode 2000 Lumens
(Colour mode: Dynamic, Zoom: Wide)
  Low Brightness Mode 1500 Lumens
(Colour mode: Dynamic, Zoom: Wide)
CONTRAST 400:1
(Colour mode : Dynamic, High Brightness mode)
BRIGHTNESS UNIFORMITY 90% (Typ.)
COLOUR REPRODUCTIVITY Full colour (16.77 million colours)
SOUND OUTPUT
(Internal Speaker) 		1W monaural
FUNCTION Pointer, User Logo, A/V mute, Freeze
COLOUR MODE Dynamic, Presentation, Living room, Theatre, Blackboard, sRGB
EFFECTIVE SCANNING FREQUENCY RANGE
PIXEL CLOCK 13.5MHz to 162MHz
HORIZONTAL 15KHz to 92KHz
VERTICAL 50Hz to 85Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Keystone / Brightness / Contrast / Tint / Saturation / Sound / Input signal etc.
FOOT ADJUSTER Front centre, rear
TILT ANGLE 0 to 12 degrees
KEYSTONE CORRECTION Vertical : -30 to +30 degrees ( Zoom: Tele)
AUTO KEYSTONE CORRECTION Implemented
AUTO SOURCE DETECTION Implemented (Vertical)
Vertical : -30 to +30 degrees ( Zoom: Tele)
PASSWORD PROTECTION FUNCTION (Security function) Implemented
(Protection of User logo, operation panel, Time lock)
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1024 x 768 pixels
INPUT SIGNAL Signal type Separate signal
  Video signal Analogue (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm)
  Sync. signal Separate (positive & negative, bi-polarity 2-5Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
VIDEO INPUT TERMINAL Mini D-sub 15-pin x 1 Blue molding
VIDEO I/O
DISPLAY PERFORMANCE   NTSC: 560 line PAL: 560 line (Depends on observation of the multi burst pattern)
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / Sync. negative, 75ohm) /
S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75ohm) /
Component Video (Analog Y level 0.7V 75ohm / Cr Cb level
+/-0.35V 75ohm / sync.negative 0.3V or 3-state +/-0.3V on Y) /
Video-RGB (0.7Vpp, 75ohm / Mac 0.714Vpp, 75ohm
VIDEO INPUT TERMINAL Video Composite Video: RCA (Yellow) x1
S-Video: Mini DIN
Component Video: Mini D-sub 15pin Blue moulding
(in common with Analog RGB connector)
Video-RGB: Mini D-sub 15pin Blue moulding
(in common with Analog RGB connector)
AUDIO I/O
Audio Signal 500m Vrms / 47Kohm
Audio Terminal Stereo mini jack x 1
Audio In
CONTROL I/O
USB I/O I/O terminal USB connector series B x1 (for mouse, K/B, control)
OPERATING TEMPERATURE 50C to 350C (410F to 950F) (20% to 80% Humidity)
COOL-DOWN PERIOD Approx. 20 seconds
DIRECT ON Implemented
START-UP PERIOD approx: 7 seconds
POWER SUPPLY VOLTAGE 100 - 240V 110%, 50/60Hz AC
POWER CONSUMPTION
  100 - 240VAC 2.7 - 1.1A, 50/60Hz AC
  Lamp ON 240W
  Standby 4.0W
DIMENSION
EXCLUDE FEET 193(D) x 276(W) x 70(H) mm
MAXIMUM DIMENSION 193(D) x 276(W) x 81(H) mm
WEIGHT Approx. 1.7Kg
FAN NOISE
LOW BRIGHTNESS MODE 36dB
ACCESSORIES
POWER CORD 1.8m
COMPUTER CABLE 1.8m, Mini D-sub 15pin (Male) - Mini D-sub 15pin (Male)
USB CABLE 1.8m, USB A / B
REMOTE CONTROL Included
BATTERY Alkaline AA x 2
AUDIO ADAPTER 3.5mm stereo miniplug (male) <-> RCA jack x 2
(female) 15cm
SOFT CARRYING CASE Included
PASSWORD PROTECT SEAL Included
LENS COVER Attached
OWNER'S MANUAL Included
QUICK REFERENCE GUIDE Included
WARRANTY
STANDARD WARRANTY 2 years*
*excluding lamp
* For more information visit http://www.epson.com.au/warranty/projector.asp?fromnav=8

Product Options

Product Code    
EMP-732 V11H187053  
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.