SureColor S60660L - 64" CISS
64" High-Production Signage & Décor Printer
| SOLVENT INK - SIGNAGE PRINTER | |
|---|---|
| PRODUCT NAME | SureColor S60660L - 64" CISS |
| SIZE | |
|---|---|
| Max Media Width | 64 inch |
| PRINT TECHNOLOGY | |
|---|---|
| Print Head | DUAL PrecisionCore TFP with advanced VSDT, auto nozzle status analysis & integrated guard |
| Print Operation | Epson Precision Dot Technology, Intelligent Media Feed System with Advanced Auto Tension Control (ad-ATC), auto head alignment, auto head cleaning, auto media setting, auto skew control, EMX media and print profile management system, self-agitating ink lines. |
| Print Modes | Uni & Bi-directional |
| Nozzle Configuration | 360 x 2 per colour per head |
| Maximum resolution | 1440dpi x 1440dpi |
| Minimum Ink Droplet Size | 4.2pl |
| INK TECHNOLOGY | |
|---|---|
| Ink Type | Pigment based Solvent |
| Ink Family | Epson Ultrachrome® GS3 |
| Colours | Dual C, M, Y, K |
| Storage | 8 x 1.5 L CISS |
| Waste System | 4 L reusable tank |
| PERFORMANCE | ||
|---|---|---|
| Max Speed | 95.3m2/hr | (360 x 720dpi 1 pass) |
| Billboard Production | 52.3m²/hr | (720 x 720dpi 2 pass) |
| Banner Production | 29.4m²/hr | (720 x 720dpi 4 pass) |
| Vinyl Production | 17.6m²/hr | (720 x 1440dpi 6 pass) |
| Film Production | 6.8m²/hr | (1440 x 1440dpi 16 pass) |
| Figures are based on print speed only and do not include provision for image processing time or transmission. Not all print modes are supported by all media and /or RIP software; individual results are subject to variation due to a variety of configuration, operational, and image specific factors. | ||
| MEDIA SUPPORT | |
|---|---|
| Input Format | Single Roll, 2” or 3” core, 250mm max outer diameter & 45kg max weight |
| Sizing | 300 to 1626mm wide, 500mm min length, 1mm max thickness |
| Minimum Print Margins | 5 mm left & right (10mm with guides) |
| Platen Gap | 1.6/2.0/2.5mm |
| Heater Settings | 30° to 50° C Pre & Platen, 30° to 55° C After (all three heaters individually adjustable) |
| Dryer Settings | On/Off/Auto |
| Output Format | Single sheet (manual cut) Roll (integrated ATU supports 2" or 3" core with 200mm max outer diameter) |
| OPERATION | |||
|---|---|---|---|
| Control Panel | 2.7” Colour LCD | ||
| RIP Compatibility | Supplied with Epson Edge Print and supports a wide range of 3rd party applications | ||
| Interface | High Speed USB 2.0 & Ethernet 100Base-T/1000Base-T | ||
| Memory | Main: 512 MB, Network: 128 MB | ||
| Power Supply | 3 x 100-240V 5A 50-60 Hz AC, 2772 W Max Peak | ||
| Control Software | Epson Edge Dashboard, Epson Accounting Tool, Epson Communication Driver, Epson Manuals Launcher, Epson LFP Remote Panel 2, Epson NetConfig, Epson NetSetup, Epson NetPrint, Epson Software Updater | ||
| RIP Software |
|
||
| Operational Temp | 15° to 35° C (20-32° C recommended) | ||
| Operational Humidity | 20 to 80% (40 to 60% recommended) | ||
| Typical Energy Use | 865 W Operating / 525 W Ready/ 23W Sleep | ||
| Operating Noise | 60.5 dB | ||
| PHYSICAL | |
|---|---|
| Printer Dimensions & Weight | 2,766 x 1,338 x 972 mm (WxHxD), 336 kg |
| Recommended Operational Space | 3.620 x 1.8 x 2.7 m |
| PACKAGING DETAILS (WxHxD) | |
|---|---|
| 1 x Head Unit | 2,870 x 1021 x 1100 mm, 380 kg |
| 1 x Media Supply System | 3,100 x 607 x 1064 mm, 80 kg |
| 1 x Continuous Ink Supply System | 606 x 912 x 894 mm, 74 kg |
| 1 x Print Drying System | 1,990 x 230 x 365 mm, 15 kg |
| 1 x Starter Ink & Media Pack | 1,400 x 300 x 300 mm, 40Kg (approx.) |
| WHAT'S IN THE BOX | |
|---|---|
| Printer, Media Supply System (with Stand, Feed and Auto Take-Up), Print Drying System, CISS unit, 1 x user maintenance kit, 1 x waste tank, 8 x cleaning liquid bags, 1 x ink set (8 x 1.5 L bags), 1 x roll of Epson Poster Paper, power cables, set-up guide, utility software and user manuals (on CD), RIP software (on DVD).1 |
| CONFIGURATION OPTIONS | |
|---|---|
| SCS60660L1YR | 1 Yr On-Site Warranty Epson Warranty Details |
| SCS60660L3YR | 1 Yr On-Site Wty + 2Yr On-Site CoverPlus (3Yrs Total Cover)2 |
| SCS60660L5YR | 1 Yr On-Site Wty + 2 x 2Yr On-Site CoverPlus (5Yrs Total Cover)2 |
| OPTIONAL ACCESSORIES | |
|---|---|
| 1YWSCS60660L | 1 Year On-Site CoverPlus Service Pack2 |
| 2YWSCS60660L | 2 Year On-Site CoverPlus Service Pack2 |
| YR6S60660L | Year 6 On-Site CoverPlus Service Pack2 |
| YR7S60660L | Year 7 On-Site CoverPlus Service Pack2 |
| RELATED PRODUCTS | |
|---|---|
| SC-S40600 | Medium to High Volume Production Model |
| SC-S60600 | High to Very High Volume Production Model |
| SC-S80600 | Medium Volume High Quality Production Model |
| SC-S80660L | High Volume High Quality Production Model |
| Usage Conditions | |
|---|---|
| Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product. |
- An internet connection will be required during installation to enable registration and download of additional utility software. A significant proportion of the included ink and cleaning liquid will be used during the set-up process to clean and prime ink lines while a small amount of media will also be used for initial print testing.
- Printers supplied through Epson Australia and New Zealand include a comprehensive 1 year on-site warranty that covers parts and labour on all non-consumable components (including the printheads) for product. CoverPlus enables on-site parts and labour service to be extended. One or more CoverPlus packs can be ordered with the printer or separately up to 365 days from the initial date of purchase to enable cover for 1, 2, 3, 4, 5, 6 and 7 year periods (total cover cannot exceed 7 years).
Service and support is provided in conjunction with the Authorised Large Format Reseller through which the product is ordered. Regional locations and certain installation situations may attract additional charges. Service may be restricted or limited when equipment is used outside of specification and/or with non-Epson consumables. For full details on coverage, terms and limitations please review the warranty terms listed on this web-site. If you have questions please contact Epson or one of our Authorised Large Format Resellers.
View or Download additional information
Find drivers, manuals and product setup for SureColor S60660L - 64" CISS.
Go to Driver Downloads| SOLVENT INK - SIGNAGE PRINTER | |
|---|---|
| PRODUCT NAME | SureColor S60660L - 64" CISS |
| SIZE | |
|---|---|
| Max Media Width | 64 inch |
| PRINT TECHNOLOGY | |
|---|---|
| Print Head | DUAL PrecisionCore TFP with advanced VSDT, auto nozzle status analysis & integrated guard |
| Print Operation | Epson Precision Dot Technology, Intelligent Media Feed System with Advanced Auto Tension Control (ad-ATC), auto head alignment, auto head cleaning, auto media setting, auto skew control, EMX media and print profile management system, self-agitating ink lines. |
| Print Modes | Uni & Bi-directional |
| Nozzle Configuration | 360 x 2 per colour per head |
| Maximum resolution | 1440dpi x 1440dpi |
| Minimum Ink Droplet Size | 4.2pl |
| INK TECHNOLOGY | |
|---|---|
| Ink Type | Pigment based Solvent |
| Ink Family | Epson Ultrachrome® GS3 |
| Colours | Dual C, M, Y, K |
| Storage | 8 x 1.5 L CISS |
| Waste System | 4 L reusable tank |
| PERFORMANCE | ||
|---|---|---|
| Max Speed | 95.3m2/hr | (360 x 720dpi 1 pass) |
| Billboard Production | 52.3m²/hr | (720 x 720dpi 2 pass) |
| Banner Production | 29.4m²/hr | (720 x 720dpi 4 pass) |
| Vinyl Production | 17.6m²/hr | (720 x 1440dpi 6 pass) |
| Film Production | 6.8m²/hr | (1440 x 1440dpi 16 pass) |
| Figures are based on print speed only and do not include provision for image processing time or transmission. Not all print modes are supported by all media and /or RIP software; individual results are subject to variation due to a variety of configuration, operational, and image specific factors. | ||
| MEDIA SUPPORT | |
|---|---|
| Input Format | Single Roll, 2” or 3” core, 250mm max outer diameter & 45kg max weight |
| Sizing | 300 to 1626mm wide, 500mm min length, 1mm max thickness |
| Minimum Print Margins | 5 mm left & right (10mm with guides) |
| Platen Gap | 1.6/2.0/2.5mm |
| Heater Settings | 30° to 50° C Pre & Platen, 30° to 55° C After (all three heaters individually adjustable) |
| Dryer Settings | On/Off/Auto |
| Output Format | Single sheet (manual cut) Roll (integrated ATU supports 2" or 3" core with 200mm max outer diameter) |
| OPERATION | |||
|---|---|---|---|
| Control Panel | 2.7” Colour LCD | ||
| RIP Compatibility | Supplied with Epson Edge Print and supports a wide range of 3rd party applications | ||
| Interface | High Speed USB 2.0 & Ethernet 100Base-T/1000Base-T | ||
| Memory | Main: 512 MB, Network: 128 MB | ||
| Power Supply | 3 x 100-240V 5A 50-60 Hz AC, 2772 W Max Peak | ||
| Control Software | Epson Edge Dashboard, Epson Accounting Tool, Epson Communication Driver, Epson Manuals Launcher, Epson LFP Remote Panel 2, Epson NetConfig, Epson NetSetup, Epson NetPrint, Epson Software Updater | ||
| RIP Software |
|
||
| Operational Temp | 15° to 35° C (20-32° C recommended) | ||
| Operational Humidity | 20 to 80% (40 to 60% recommended) | ||
| Typical Energy Use | 865 W Operating / 525 W Ready/ 23W Sleep | ||
| Operating Noise | 60.5 dB | ||
| PHYSICAL | |
|---|---|
| Printer Dimensions & Weight | 2,766 x 1,338 x 972 mm (WxHxD), 336 kg |
| Recommended Operational Space | 3.620 x 1.8 x 2.7 m |
| PACKAGING DETAILS (WxHxD) | |
|---|---|
| 1 x Head Unit | 2,870 x 1021 x 1100 mm, 380 kg |
| 1 x Media Supply System | 3,100 x 607 x 1064 mm, 80 kg |
| 1 x Continuous Ink Supply System | 606 x 912 x 894 mm, 74 kg |
| 1 x Print Drying System | 1,990 x 230 x 365 mm, 15 kg |
| 1 x Starter Ink & Media Pack | 1,400 x 300 x 300 mm, 40Kg (approx.) |
| WHAT'S IN THE BOX | |
|---|---|
| Printer, Media Supply System (with Stand, Feed and Auto Take-Up), Print Drying System, CISS unit, 1 x user maintenance kit, 1 x waste tank, 8 x cleaning liquid bags, 1 x ink set (8 x 1.5 L bags), 1 x roll of Epson Poster Paper, power cables, set-up guide, utility software and user manuals (on CD), RIP software (on DVD).1 |
| CONFIGURATION OPTIONS | |
|---|---|
| SCS60660L1YR | 1 Yr On-Site Warranty Epson Warranty Details |
| SCS60660L3YR | 1 Yr On-Site Wty + 2Yr On-Site CoverPlus (3Yrs Total Cover)2 |
| SCS60660L5YR | 1 Yr On-Site Wty + 2 x 2Yr On-Site CoverPlus (5Yrs Total Cover)2 |
| OPTIONAL ACCESSORIES | |
|---|---|
| 1YWSCS60660L | 1 Year On-Site CoverPlus Service Pack2 |
| 2YWSCS60660L | 2 Year On-Site CoverPlus Service Pack2 |
| YR6S60660L | Year 6 On-Site CoverPlus Service Pack2 |
| YR7S60660L | Year 7 On-Site CoverPlus Service Pack2 |
| RELATED PRODUCTS | |
|---|---|
| SC-S40600 | Medium to High Volume Production Model |
| SC-S60600 | High to Very High Volume Production Model |
| SC-S80600 | Medium Volume High Quality Production Model |
| SC-S80660L | High Volume High Quality Production Model |
| Usage Conditions | |
|---|---|
| Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product. |
- An internet connection will be required during installation to enable registration and download of additional utility software. A significant proportion of the included ink and cleaning liquid will be used during the set-up process to clean and prime ink lines while a small amount of media will also be used for initial print testing.
- Printers supplied through Epson Australia and New Zealand include a comprehensive 1 year on-site warranty that covers parts and labour on all non-consumable components (including the printheads) for product. CoverPlus enables on-site parts and labour service to be extended. One or more CoverPlus packs can be ordered with the printer or separately up to 365 days from the initial date of purchase to enable cover for 1, 2, 3, 4, 5, 6 and 7 year periods (total cover cannot exceed 7 years).
Service and support is provided in conjunction with the Authorised Large Format Reseller through which the product is ordered. Regional locations and certain installation situations may attract additional charges. Service may be restricted or limited when equipment is used outside of specification and/or with non-Epson consumables. For full details on coverage, terms and limitations please review the warranty terms listed on this web-site. If you have questions please contact Epson or one of our Authorised Large Format Resellers.