| PRINT |
| Printing technology |
PrecisionCore inkjet technology |
| Number of printheads |
8 |
| Number of colours |
8 |
| Maximum print resolution |
1,200 x 1,200 dpi (Pigment ink printing) |
| Gradation process |
Variable-Sized Droplet Technology |
| Max print width |
1,850 mm (72.8") |
| Max print length |
Unlimited |
| Max fabric width |
1,850 mm (72.8") |
| Max fabric thickness |
5.0 mm |
| PRINT SPEED |
| Square |
Maximum printing speed (m2/h) 290
(300 × 600 dpi, 1 pass)2 |
Typical printing speed 1 (m2/h) 155
(600 × 600 dpi, 2 pass)3 |
Typical printing speed 2 (m2/h) 104
(900 × 600 dpi, 3 pass)4 |
Maximum printing speed (sq ft/hr) 3,122
(300 × 600 dpi, 1 pass)2 |
Typical printing speed 1 (sq ft/hr) 1,668
(600 × 600 dpi, 2 pass)3 |
Typical printing speed 2 (sq ft/hr) 1,119
(900 × 600 dpi, 3 pass)4 |
| Linear |
Maximum printing speed (lmt/h) 193
(300 × 600 dpi, 1 pass)2 |
Typical printing speed 1 (lmt/h) 103
(600 × 600 dpi, 2 pass)3 |
Typical printing speed 2 (lmt/h) 69
(900 × 600 dpi, 3 pass)4 |
Maximum printing speed (li ft/hr) 634
(300 × 600 dpi, 1 pass)2 |
Typical printing speed 1 (li ft/hr) 339
(600 × 600 dpi, 2 pass)3 |
Typical printing speed 2 (li ft/hr) 227
(900 × 600 dpi, 3 pass)4 |
| GENESTA INK |
| Pigment Inks |
Black, Cyan, Magenta, Yellow, Grey, Red, Green, Orange (10L or 3L) |
| FABRIC HANDLING |
| Fabric drive |
Conveyor belt with thermoplastic adhesive |
| Belt washing |
Automatic |
| STANDARD FEEDER |
| Fabric roll diameter |
400mm (15.7”) |
| Fabric roll weight |
100Kg (220 lb) |
| Fabric roll core diameter |
2” or 3” |
| ENVIRONMENTAL CHARACTERISTICS |
| Temperature |
Operating: 20°C - 30°C
Recommended: 22°C - 28°C |
| Humidity |
Operating: 35 - 80%RH (no condensation) |
| ELECTRICAL |
| Voltage |
Main unit: 380~415 V, 3 phase + Neutral + Earth
50Hz/60Hz ± 3% |
| Rated current |
Main unit: 30 A |
| Power consumption (Operating) |
Main unit: 12 kw |
| AIR SUPPLY |
| Air tube connection |
Ø125 mm |
| Air flow |
900 m3 per hour |
|
WATER DRAIN
|
| Connector |
Connect with a Ø25 mm (int. diam) pipe |
|
WATER INK DRAIN
|
| Flushing area connector |
Connect with a Ø12 mm (int. diam) hose |
| Waste ink Connector |
Connect with a Ø25 mm (int. diam) hose |
|
NETWORK
|
| Transmission Speed |
USB 3.0 Ethernet 1000BASE-T |
|
SYSTEM REQUIREMENTS
|
A personal computer will be required for installation and operation of this printing system. The PC should have a minimum 3Ghz multicore processor with separate GPU, 8GB memory, 250GB HDD (1TB recommended), running 64bit Windows 7/8 or OS X/10.6.8 or greater. For optimum performance it is recommended that 1000Base-T Ethernet networking be employed. A network with external Web access will be required for installation, registration and software activation. Operation of Epson Cloud Solution PORT will require that the printer be connected to a network with Internet access and a router configured for two way data exchange.
The typical operational environment for this printer will require a calendar style heat press which will need to be sourced separately. Please speak with your dealer for recommendations. |
|
SERVICE & SUPPORT
|
| This printer is covered by a 30 day warranty that covers parts and labour. It is supplied with additional CoverPlus that extends cover to a total of 1, 3 or 5 years. Customers who need 2 or 4 year cover can purchase an additional 1 year of CoverPlus. Customers who order their printer with 1 or 3 year CoverPlus may extend cover through the purchase of one or more CoverPlus Packs within 365 days of the original installation (total cover may not exceed 5 years). |
 |
|
IMPORTANT NOTES
Epson Cloud Solution PORT is a secure cloud based service that is used to facilitate the provision of support on this model. Agreement to the terms of supply and registration under the program is required to enable fulfilment of CoverPlus. During operation the the printer must remain connected to a network with Internet access via a router configured for two way data transfer.
This model supports User Self Replacement of print heads. Operation requires Epson Cloud Solution PORT and nomination of one or more staff members to perform the process. Staff should have a moderate level of technical skill and will be required to undertake training (this can generally be performed during the installation process). In the event that staff leave employment replacements will need to be nominated and undertake training (this may attract additional charges).
Service may be restricted or limited if equipment is not installed in an appropriate environment, not appropriately maintained, be modified, used outside of specification &/or with non-Epson consumables. For further details on cover, terms and conditions please review the warranty terms listed on this web-site. Do not make modifications to the product, take care with the use of 3rd party consumables, consult Epson directly if you have any questions or concerns.
|
