The ML-8000 is a new addition to the digital textile printing landscape. Equipped with eight newly developed PrecisionCore printheads, it packs the power and performance of world-class Epson inkjet printing and manufacturing technologies into an accessible entry-level package. Offering unprecedented performance and usability, it is a next-generation digital textile printer that will take production capabilities to a new level.

• Exceptionally high print quality on a range of fabrics
• 8 PrecisionCore Micro TFP printheads
• Epson precision dot technology
• Multi-Layer Halftone Technology (MLHT)
• Dynamic Alignment Stabiliser (DAS) Technology
• Symmetrical colour alignment
• Accurate Belt Position Control (ABPC) Technology
• Stable operation / Easy maintenance
• Fluff blower system
• Ink mist extraction system
• Nozzle Verification Technology (NVT)
• Auto nozzle cleaning by fabric wiper
• Built-in RGB camera for auto calibration
• Epson Cloud Solution PORT
• Easy operation
• 9-inch LCD touch panel
• Dual 10-litre or 3-litre high-capacity ink cartridges

High print quality and productivity

The ML-8000 boasts a typical print speed of 162 square metres per hour (2-pass printing at 600 x 600 dpi). Epson precision dot technologies include Microweave and lookup table (LUT) technologies that reduce banding and graininess, and advanced new Multi-Layer Halftone Technology (MLHT) that randomises the halftone dot pattern to reduce image degradation caused by dot misalignment. Dynamic Alignment Stabiliser (DAS) technology also ensures stable print quality by controlling waveforms on each printhead chip for higher dot placement accuracy and more uniform dot density on each pass. The ML-8000 also features symmetrical colour alignment for consistent colour overlap order during high-speed bidirectional printing, and Accurate Belt Position Control (ABPC) technology for precise fabric feeding. The result is optimal quality and speed, with superb reproduction of colour gradations, fine details, and complex geometric patterns.

Stable operation with minimal downtime

Stable operation and unprecedented usability are realised by advanced cleaning mechanisms and automated adjustment functions. A fluff blower system removes fluff from the fabric surface before it enters the printing area, and an ink mist extraction system helps reduce nozzle clogging problems. In the event a nozzle does become clogged, Nozzle Verification Technology (NVT) detects missing dots and adjusts ink delivery to maintain image quality and reduce printing errors. Auto nozzle cleaning by fabric wiper reduces daily manual maintenance work. With high-accuracy head alignment technology and automatic calibration by the built-in RGB camera, printhead replacement and calibration can be completed easily. In addition, the Epson Remote Monitoring System reduces downtime and service calls by allowing quick response to potential problems.

Easy operation

Ease of use is enhanced by a 9-inch LCD touch panel that displays current printer status, operating instructions, and regular maintenance procedures, and by hot-swappable, dual 10-litre or 3-litre high-capacity ink cartridges that allow uninterrupted production.

Environmentally friendly GENESTA Ink

Epson GENESTA inks are Pigment formulations, and are ECO PASSPORT certified to meet globally recognised standards for environmentally friendly textile printing. Our Acid ink is also bluesign® approved, and our Reactive and Pigment inks are GOTS approved by ECOCERT.

Software for digital textile printing

Our original RIP software, Epson Edge Print Textile, has an intuitive interface for easy, 3-step, left-to-right operation, as well as step & repeat, hot folders, colour replacement for matching spot colours, and other convenient features. Optional ColorBlend preprocessing software also lets you create colour variations (colorways), control ink penetration to achieve visual equivalence on both sides of fabric, generate ICC profiles, and perform other preprocessing task

Product Specifications

PRINT
Printing technology	PrecisionCore inkjet technology
Number of printheads	8
Number of colours	8
Maximum print resolution	1,200 x 1,200 dpi (Pigment ink printing)
Gradation process	Variable-Sized Droplet Technology
Max print width	1,850 mm (72.8")
Max print length	Unlimited
Max fabric width	1,850 mm (72.8")
Max fabric thickness	5.0 mm
PRINT SPEED
Square	Maximum printing speed (m2/h) 290 (300 × 600 dpi, 1 pass)2
	Typical printing speed 1 (m2/h) 155 (600 × 600 dpi, 2 pass)3
	Typical printing speed 2 (m2/h) 104 (900 × 600 dpi, 3 pass)4
	Maximum printing speed (sq ft/hr) 3,122 (300 × 600 dpi, 1 pass)2
	Typical printing speed 1 (sq ft/hr) 1,668 (600 × 600 dpi, 2 pass)3
	Typical printing speed 2 (sq ft/hr) 1,119 (900 × 600 dpi, 3 pass)4
Linear	Maximum printing speed (lmt/h) 193 (300 × 600 dpi, 1 pass)2
	Typical printing speed 1 (lmt/h) 103 (600 × 600 dpi, 2 pass)3
	Typical printing speed 2 (lmt/h) 69 (900 × 600 dpi, 3 pass)4
	Maximum printing speed (li ft/hr) 634 (300 × 600 dpi, 1 pass)2
	Typical printing speed 1 (li ft/hr) 339 (600 × 600 dpi, 2 pass)3
	Typical printing speed 2 (li ft/hr) 227 (900 × 600 dpi, 3 pass)4
GENESTA INK
Pigment Inks	Black, Cyan, Magenta, Yellow, Grey, Red, Green, Orange (10L or 3L)
FABRIC HANDLING
Fabric drive	Conveyor belt with thermoplastic adhesive
Belt washing	Automatic
STANDARD FEEDER
Fabric roll diameter	400mm (15.7”)
Fabric roll weight	100Kg (220 lb)
Fabric roll core diameter	2” or 3”
ENVIRONMENTAL CHARACTERISTICS
Temperature	Operating: 20°C - 30°C Recommended: 22°C - 28°C
Humidity	Operating: 35 - 80%RH (no condensation)
ELECTRICAL
Voltage	Main unit: 380~415 V, 3 phase + Neutral + Earth 50Hz/60Hz ± 3%
Rated current	Main unit: 30 A
Power consumption (Operating)	Main unit: 12 kw
AIR SUPPLY
Air tube connection	Ø125 mm
Air flow	900 m3 per hour
WATER DRAIN
Connector	Connect with a Ø25 mm (int. diam) pipe
WATER INK DRAIN
Flushing area connector	Connect with a Ø12 mm (int. diam) hose
Waste ink Connector	Connect with a Ø25 mm (int. diam) hose
NETWORK
Transmission Speed	USB 3.0 Ethernet 1000BASE-T
SYSTEM REQUIREMENTS
A personal computer will be required for installation and operation of this printing system. The PC should have a minimum 3Ghz multicore processor with separate GPU, 8GB memory, 250GB HDD (1TB recommended), running 64bit Windows 7/8 or OS X/10.6.8 or greater. For optimum performance it is recommended that 1000Base-T Ethernet networking be employed. A network with external Web access will be required for installation, registration and software activation. Operation of Epson Cloud Solution PORT will require that the printer be connected to a network with Internet access and a router configured for two way data exchange. The typical operational environment for this printer will require a calendar style heat press which will need to be sourced separately. Please speak with your dealer for recommendations.
SERVICE & SUPPORT
This printer is covered by a 30 day warranty that covers parts and labour. It is supplied with additional CoverPlus that extends cover to a total of 1, 3 or 5 years. Customers who need 2 or 4 year cover can purchase an additional 1 year of CoverPlus. Customers who order their printer with 1 or 3 year CoverPlus may extend cover through the purchase of one or more CoverPlus Packs within 365 days of the original installation (total cover may not exceed 5 years).
IMPORTANT NOTES Epson Cloud Solution PORT is a secure cloud based service that is used to facilitate the provision of support on this model. Agreement to the terms of supply and registration under the program is required to enable fulfilment of CoverPlus. During operation the the printer must remain connected to a network with Internet access via a router configured for two way data transfer. This model supports User Self Replacement of print heads. Operation requires Epson Cloud Solution PORT and nomination of one or more staff members to perform the process. Staff should have a moderate level of technical skill and will be required to undertake training (this can generally be performed during the installation process). In the event that staff leave employment replacements will need to be nominated and undertake training (this may attract additional charges). Service may be restricted or limited if equipment is not installed in an appropriate environment, not appropriately maintained, be modified, used outside of specification &/or with non-Epson consumables. For further details on cover, terms and conditions please review the warranty terms listed on this web-site. Do not make modifications to the product, take care with the use of 3rd party consumables, consult Epson directly if you have any questions or concerns.

Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.

This printer is designed to function only with genuine Epson ink cartridges and not with third party ink cartridges. The printer may not function properly or at all if you use third party ink cartridges.