SD-10 Spectrophotometer

  • $1,395.00 inc. GST
    Add to trolley
    Adding to trolley...
    Product has been added to trolley.
    Where to buy

COLOUR MANAGEMENT
PRODUCT NAME SD-10 Spectrophotometer
IMAGING TECHNOLOGY
Sensor Custom MEMS Fabry-Perot type with tuneable filter
Spectral Range 400 ~ 700 nm
Sampling 20 nm actual, 10 nm via software interpolation
Aperture 7.6 mm
Protection Integrated lens cover
INTEGRATED LIGHT SOURCE
Type LED multi-spectrum (including UV)
Arrangement Annular
Conditions Off/On (45°C)
PERFORMANCE
Measurement Frequency 13 per second
Max Scan Length 400 mm
Accuracy 0.4 or less (∆E0 average @ 23°C)
APPLICATION
Compliance
(ISO 13655:2017)		 M0 including UV light component
M1e D50 including UV light component
M2 without UV
Calibration Automatic with integrated white test tile
Modes Spot, spot comparison, group scanning & comparison
Integrated Display Shows LAB values with delta
Added Features Data stored with time and date stamps
Recall data and compare against new readings
Values displayed in LAB,LCH, LRV, HEX, RGB & CMYK formats
Compare data with reference material including Pantone
Seek closest colour matches within reference material
Produce a gamut map with in/out markers
Export data to a PC
(Some functions require the Epson Spectrometer app)
OPERATION
Control Panel Colour LCD with push button control
Interface Bluetooth & USB2.0 full-speed (type C connector)      
Battery 1860 mAh lithium ion (charges via USB)
Memory Short Term: Up to 500 readings
Long Term: 100 readings
Software Epson Spectrometer app (Android/iOS, free download)

Integrates with Epson Edge Print V4.1 or later      
(requires separate purchase)
ENVIRONMENTAL
Operational Temp 0° to 45° C (15-30° C recommended)
Operational Humidity 5% to 85% with no condensation (30-70% recommended)
Storage -20° to 60° C @5% to 85% humidity with no condensation
Power 5V @ 0.9A
Physical Size 35 x 80 x 80 mm (W x D x H), 190 g
Packaging 169 x 163 x 93 mm (W x D xH), 678 g
WHAT'S IN THE BOX
Spectrophotometer, USB cable, carry case, hand strap and certification documentation
CONFIGURATION OPTIONS1
B41CK17401 SD-10 Spectrometer with 1Yr Warranty
SD103YR SD-10 Spectrometer with 1Yr Wty + 2Yr CoverPlus (3yr total cover)
SD105YR SD-10 Spectrometer with 1Yr Wty + 4Yr CoverPlus (5yr total cover)
Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.

Find drivers, manuals and product setup for SD-10 Spectrophotometer.

Go to Driver Downloads