| PRINTING METHOD | Impact Dot Matrix |
| NUMBER OF PINS IN HEAD | 24 pins (12 x 2 staggered) |
| PRINT DIRECTION | Bi-directional with logic seeking |
| PRINT SPEED |
|---|
| High speed draft | 300 cps |
| Draft 15 cpi | 413 cps |
| Draft 12 cpi | 330 cps |
| Draft 10 cpi | 275 cps |
| LQ 15 cpi | 138 cps |
| LQ 12cpi | 110 cps |
| LQ 10 cpi | 92 cps |
PRINT CHARACTERISTICS
Character sets |
1 legal character set14 International character sets 11 character code tables italic, PC437, PC 850, PC860, PC861, PC863, PC865, Abicomp, BRASC II, Roman 8, ISO Latin 1 |
| Bitmap Fonts | Epson Draft Epson Roman 10, 12, 15cpi proportional Epson Sans Serif 10, 12, 15cpi proportional Epson Courier 10, 12, 15cpi Epson Prestige 10, 12cpi Epson Script 10cpi Epson OCR-B 10cpi Epson Orator 10cpi Epson Orator -S 10cpi |
| Scalable Fonts | Epson Script C Proportional Epson Roman 8 to 32 points Epson Sans Serif 8 to 32 points Epson Roman T 8 to 32 points Epson Sans Serif H 8 to 32 points |
| Bar Code Fonts | EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, POSTNET |
| PRINTABLE COLUMNS | Characters per line / per inch |
| 10 cpi | 136 / 10 |
| 10 cpi condensed | 233 / 17.1 |
| 12 cpi | 163 / 12 |
| 12 cpi condensed | 272 / 20 |
| 15 cpi | 204 / 15 |
| PAPER HANDLING |
|---|
| Cut Sheet Size | Width: 101mm-420mm Length: Max: 420mm |
| Envelopes Cards | No. 6, No. 10 Width: 105mm-148mm Length: Max. 148mm |
| Continuous Paper Size | Width: 101-406mm |
| | * can also print labels Cut sheet |
| Paper Thickness | Single sheet 0.065-0.14mm Multi-part forms 0.12-0.32mm Card 0.22mm Continuous Paper Multi-part forms 0.065-0.32mm |
| Paper Feeding | Friction Feed Front/Rear (standard) Push tractor feed: rear (standard) front (optional) Push-pull Tractor feed: Rear (standard push with one optional pull tractor) Front (with two optional pull tractors) Pull Tractor Feed Front/rear/bottom (with optional pull tractor * The optional pull tractor can al be used as a front push tractor |
| Copies | Original +3 copies |
| Paper Path | Cut Sheet Front/Rear Entry Continuous Paper Front/Rear/ Bottom Entry |
| Line spacing | 1/6" or programmable by 1/360" |
| Input Data Buffer | 64K or 0K Byte (selectable) |
| INTERFACES | Bi-directional, 8-bit parallel interface (IEEE-P1284 nibble mode supported) Optional Type B interface (see OPTIONS) |
| CONTROL CODE | ESC/P2 IBMÆ X24E/XL24E |
| RIBBON CARTRIDGE Colour |
BlackFabric ribbon Cartridge (s015O086) |
| RELIABILITY Total Print Volume MTBF 6000 POH) Print Head Life Ribbon Life |
6 million lines (except print head)
200 million strokes/wire 8 million characters |
| CONTROL PANEL Buttons
Indicators |
Operate, Pause, Load/Eject, FL/FF, Tear Off/Bin, Font, CondensedPause, Paper out, Paper jam, Head hot, Micro adjust, Tear off, Bin selection, Condensed, Font selection, Fatal error |
| ACOUSTIC NOISE | Approx. 50dB(A) (ISO 7779 pattern) |
| ENVIRONMENTAL CONDITIONS |
|---|
| Temperature Humidity | 5_ to 35_ C (operating, *1) 15_ to 25_ C (operating, *1, *2) 10 to 80% RH (operating, *1) 30 to 60% RH (operating, *1, *2) *1: without condensation *2: during printing on multi-part paper, envelopes, cards or labels |
| POWER REQUIREMENTS |
|---|
| Voltage Rated frequency Power consumption | 120V or 220V-240V AC 50 to 60 Hz Approx. 34W (ISO10561 Letter pattern) |
| DIMENSIONS Width x Depth x Height Weight |
639 X 402 X 257mmApprox. 13 kg |
| WARRANTY | 12 months return to base |
Equipment supplied by Epson Australia is designed to function in conjunction with
genuine Epson consumables and accessories specifically configured for it.
This printer is designed to function only with genuine Epson ink cartridges and not with third party ink cartridges. The printer may not function properly or at all if you use third party ink cartridges.
