Epson EB-770F

EB-770F

Ultra Short Throw Projectors

1080p 3LCD Ultra Short Throw Lamp-Free Laser Display



PRODUCT NAME EB-770F
PRODUCT CODE V11HA79053
TECHNOLOGY  
Projection System Epson 3LCD, 3-chip technology
LCD Panel 0.62-inch (C2fine)
Resolution 1080p
OPTICAL  
Zoom 1 – 1.35 (Digital)
Screen Size 60" to 150" [32.5 cm to 89.3 cm] @16:9
57" to 142" [39.4 cm to 85.3 cm] @21:9
Projection Distance 77" screen at 43.3 cm
Throw Ratio 0.25 (Zoom:Wide)
0.35 (Zoom:Tele)
Projection Lens F Number 1.6
Projection Lens Focal Length 3.7 mm
Focus Method Manual
Offset 5.2 : -1
IMAGE  
Colour Light Output 4,100 lumens
White Light Output 4,100 lumens
Native Aspect Ratio 16:9
Contrast Ratio Over 2,500,000:1
Light Source Laser diode
Colour Reproduction Up to 1.07 billion colours
Colour Processing 10 bit
Keystone Correction Vertical: -3 to +3 degrees
Horizontal: -3 to +3 degrees
Quick Corner Yes (Manual)
Auto Setup Yes
Refresh Rate 192 Hz / 240 Hz
CONNECTIVITY  
Video I/O - Input 2 x RGB D-sub 15-pin
1x RCA Composite
Video I/O - Output 1 x RGB D-sub 15-pin (shared)
Digital Input 3 x HDMI
Audio I/O - Input 3 x Stereo mini
1 x Mic-In Stereo Mini
Audio I/O - Output 1 x Stereo mini
Control I/O 1 x RS232C (D-sub 9-pin)
USB I/O 2 x Type A (for PC free, firmware update, Copy OSD settings, 5V/2A power supply1)
1 x Type B (Firmware update, Copy OSD Settings, USB display)
Network I/O: 1 x RJ45, 1 x USB Type A for optional wireless LAN2
Wireless Connectivity Included
Speaker Output 1 x 16 W Stereo
ADVANCED FEATURES  
Miracast Yes
Super Resolution Yes
Detail Enhancement Yes
Scene Adaptive Gamma Correction Yes
Edge Blending Yes
Partner Standards Crestron Integrated Partner, Crestron Connected, Extron IP Link, AMX Device Discovery, Control4 Simple Device Discovery Protocol
Wireless LAN Security WPA2/WPA3-PSK, WPA2/WPA3-EAP
Instant Off Yes
Direct Power On Yes
Auto Power On Yes
Security Padlock and security cable hole
Kensington® lock provision
Wireless LAN Unit Lock
Password protection
Colour Modes Dynamic
Presentation
Cinema
sRGB
BlackBoard
DICOM SIM
Multi-Projection
Wall Mount Optional (ELPMB62)
EPSON SOFTWARE  
Epson Projection Management Software Yes
Ver 5.43 (Windows)
Epson iProjection Software Yes
Ver 3.32 (Windows)
Ver 3.31 (mac OS)
Ver 3.3.1 (iOS/Android)
Ver 2.1.0 (Chrome)
Firmware Update Network via LAN cable,
Network via Wireless LAN,
USB A via USB thumb drive,
USB B via USB cable
Copy OSD settings Network via LAN cable,
USB A via USB thumb drive,
USB B via USB cable
Epson Projector Content Manager Ver 1.201 (Windows)
Ver 1.21 (mac OS)
Epson Creative Projection Ver 1.0.4 (iOS)
GENERAL  
Dimensions D x W x H (including feet) 395 x 357 x 165 mm
Weight 5.9 kg
Projector Warranty 3 Years
Power Consumption: Projector on 263 W
Power Consumption: Standby 2 W
Noise Level (Normal / Eco) 37 / 27 dB
WHAT'S IN THE BOX  
Main Unit EB-770F Projector
Power Cable 1.8 m
Remote Control Yes
Battery for Remote Control 2 x AA
Projector Feet Yes
Quick Start Guide Yes
1 5V/2A power supply only via rear USB A port
2 With an optional ELPAP11, it is possible to use the Miracast and Wi-Fi function simultaneously (both simple AP mode and manual mode)
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.