Epson EH-TW5500

Epson EH-TW5500

Home Theatre Projectors

The Ultimate High Definition Projector for Home Theatre Enthusiasts


Overview Specs Consumables PDF Brochure Downloads

PRODUCT TYPE Home Theatre Projectors
PRODUCT NAME Epson EH-TW5500
PRODUCT CODE V11H338453
PROJECTION SYSTEM RGB Liquid Crystal Display
PROJECTION METHOD Front / Rear / Ceiling Mount
SPECIFICATION OF MAIN PARTS
LCD Size 0.74 inches wide D7 panel with MLA
  Driving method Poly-Silicon TFT Active Matrix
  Native resolution 1080P Full HD (1920 x 1080)
  Pixel number 2073600 pixels (1920 x 1080 pixels) x 3
  Aspect ratio 16:9
  Pixel arrangement Stripe
  Refresh Rate 100Hz or 120Hz (based on input signal)
PROJECTION LENS Type manual: zoom / focus
  F-number 2.0 - 3.17
  Focus length 22.5 - 47.2mm
  Zoom ratio 1.0:2.1
LAMP Type 200 W UHE E-TORL Lamp
SCREEN SIZE (PROJECTED DISTANCE) 30 to 300 inch (0.87m to 9.03m) (Wide)
30 to 300 inch (1.88m to 19.15m) (Tele)
LENS SHIFT RANGE Vertical: 96.3% max. (upward & downwards)
Horizontal: 47.1% max. (Left and Right)
BRIGHTNESS
  Normal Mode 1,600 Lumens Light Output
1,600 Lumens Colour Light Output
    Colour Mode ( Dynamic, Zoom: Wide, Lens shift: V5.5 / H Centre )
  *For further information on Colour Light Output click here
CONTRAST 200000:1 ( Colour Mode: Dynamic, Zoom: Wide, Lens shift: : V10 / H Centre , Auto iris: On )
COLOUR PROCESSING Full 10 bit
COLOUR REPRODUCTIVITY Full Colour (1.07 Billion Colours)
COLOUR SPACE 115% of NTSC
VIDEO QUALITY Interlace - Progressive conversion 3D Y/C separation, Noise reduction, Mosquito NR, Block NR
EFFECTIVE SCANNING FREQUENCY RANGE (Digital)
PIXEL CLOCK 13.5MHz to 150MHz
HORIZONTAL 15 to 80KHz
VERTICAL 24, 50 to 85Hz
ADJUSTMENT FUNCTION
PROJECTOR / REMOTE CONTROL Brightness / Contrast / Tint / Saturation / Input signal etc.
TILT ANGLE 0 to 8.0 degrees
KEYSTONE CORRECTION N/A

COLOUR MODE

 Dynamic, Living Room, Natural, Theatre, Theatre Black 1, Theatre Black 2, x.v. Color
EPSON CINEMA FILTER

Controlled automatically with colour mode
(ON: Natural / Theatre / Theatre Black 1 / Theatre Black 2 / x.v.Color,  OFF: Dynamic / Living room)
AUTO IRIS Controlled automatically adjusting to video source. (Available at all colour modes except x.v.Color; user selectable Off/Normal/Fast on OSD)
EPSON SUPER WHITE

Controlled automatically adjusting to video source (Available at Natural/Theatre/Theatre Black 1 and 2; user selectable ON/OFF on OSD)

4:4 Pull Down (1080p/24p, 1080/60i, or480i capability)

On/Off, convert 3:2 pull down signal to 4:4 pull down (Default on:1080/24p, Default off:1080/60i or 480i, HDMI & Component Input)
ASPECT MODE Auto / Normal / Full / Zoom / Wide / Anamorphic Wide
ANALOGUE RGB I/O
DISPLAY PERFORMANCE Native 1080p
  Resize 1280 x 1024 / 1360 x 768 / 1024 x 768 / 800 x 600 / 640 x 480
INPUT SIGNAL Signal type Separate signal
  Video signal Analog (0.7V p-p,75 ohm/ Mac0.714Vp-p, 75ohm)
  Sync.signal Separate (positive & negative, bi-polarity 2-5Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
INPUT TERMINAL Video Mini D-sub 15 pin x 1 Blue molding
HDMI Ver.1.3
DISPLAY PERFORMANCE Native 1080p
  Video standard 480i / 576i / 480p / 576p / 720p / 1080i / 1080p
  Video signal TMDS ( Signal for HDMI)
  Input Terminal HDMI x 2 (HDCP)
VIDEO I/O
COMPONENT INPUT
INPUT SIGNAL Video standard 480i / 576i / 480p / 576p / 720p / 1080i / 1080p
  Video signal Component Video (Analog Y level 0.7V 75 ohm / Cr Cb level +/-0.35V 75 ohm / sync. negative 0.3V or 3-state +/-0.3V on Y)
INPUT TERMINAL   RCA x 3 (Red / Green / Blue)
COMPOSITE / S VIDEO
INPUT SIGNAL Video standard NTSC / NTSC4.43 / PAL / M-PAL / N-PAL / PAL60 / SECAM
  Video signal Composite Video (1.0Vpp / Sync.negative, 75 ohm) / S-Video (Luminous 0.714Vpp, Chrominous 0.286Vpp, 75 ohm)
INPUT TERMINAL S-Video Mini DIN x1
  Composite Video RCA (Yellow) x 1
CONTROL I/O
SERIAL I/O I/O terminal D-sub 9 pin x 1
  I/O signal RS-232c
TRIGGER OUT

Output terminal
3.5 mm mini-jack x 1
  Output Signal Power on: 12v DC, 200mA max Power off: 0v
LOCK FUNCTION Operation Lock & child-lock
OPERATING TEMPERATURE 5°C to 35 °C (41°F to 95 °F) at 20% ~ 80% Humidity
DIRECT POWER ON Yes
COOL-DOWN PERIOD Approx 16 seconds
POWER SUPPLY VOLTAGE 100-240 VAC ±10%, 50/60Hz
POWER CONSUMPTION 299W (Lamp High)
DIMENSIONS
EXCLUDE FEET 450mm(W) x 360mm(D) x 136mm(H)
MAXIMUM DIMENSION 450mm(W) x 390mm(D) x 145mm(H)
WEIGHT Approx. 7.3 kg
FAN NOISE  
HIGH BRIGHTNESS MODE 30dB (Colour mode: Dynamic)
WHISPER MODE 22dB (Colour mode: Theatre Black 1 and 2)
ACCESSORIES
POWER CORD 3m
REMOTE CONTROL Stick type (backlight)
BATTERY Alkaline, AA x2 (Included)
USER'S MANUAL Included
LENS CAP Included
WARRANTY* 3 years
* including lamp  
* For more information visit Epson Projector Warranty
PRODUCT OPTIONS
Product Code Item Code Description
V13H010L49 V13H010L49 Lamp
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.

Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accessories specifically configured for it.


Usage Conditions
Epson products are designed and manufactured to be highly reliable and last a long time when used according to their specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to - do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (e.g. power cords, inks, CDs, plastic wrapping) and do not make modifications to the product.